Customize Parameters [09/2012 - ]

HINT: 

The following items can be customized.

1. Customizing with the Techstream
   1. Connect the Techstream to the DLC3.
   2. Turn the engine switch on (IG).
   3. Turn the Techstream on.
   4. Enter the following menus: Customize Setting / Wireless Door Lock.
   5. Select the setting by referring to the table below.
      WIRELESS DOOR LOCK
      
      

      Display (Item)	Default	Contents	Setting	Relevant ECU
      Hazard Answer Back	ON	When LOCK switch on transmitter is pressed, this function illuminates hazard warning lights once. When UNLOCK switch is pressed, hazard warning lights illuminate twice	ON or OFF	Main body ECU (Driver side junction block)
      Wireless Control	ON	Function that turns wireless door lock function ON or OFF	ON or OFF	Main body ECU (Driver side junction block)
      Open Door Warning	ON	If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds	ON or OFF	Main body ECU (Driver side junction block)
      Trunk Lid Operation	0.8 s	This function changes transmitter operation method for opening luggage compartment door	1 tim ON, 2 tim ON, 0.8 s or Prohibit	Main body ECU (Driver side junction block)
      Panic Alarm Function	ON	Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 2.5 seconds	ON or OFF	Certification ECU
      Unlock 2 Operation	ON	Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.	ON or OFF	Main body ECU (Driver side junction block)
      Auto Lock Time	60 s	Function to change time until relocking after unlocking with wireless door lock function	30 s, 60 s or 120 s	Main body ECU (Driver side junction block)
      Wireless Auto Lock	ON	This function controls unlocking doors to automatic relocking function	ON or OFF	Main body ECU (Driver side junction block)

2. Customizing with the Accessory meter assembly
   1. Turn the engine switch on (IG).
   2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.
   3. Select the setting by referring to the table below.
      DOOR LOCK SETTINGS
      
      

      Display	Default	Contents	Setting	Relevant ECU
      Remote 2-Press Unlock	On	Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock	On or Off	Main body ECU (Driver side junction block)
      Auto Relock Timer*	60 sec.	Function that regulates the interval between unlocking and automatic relocking of doors	120 sec., 60 sec., 30 sec. or Off	Main body ECU (Driver side junction block)
      Lock/Unlock Feedback-Lights	On	When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice	On or Off	Main body ECU (Driver side junction block)
      Lock Feedback Volume	5 Bars	Wireless door lock buzzer volume	0, 1, 2, 2, 4, 5, 6 or 7 Bars	Certification ECU

      • *: except Korea