Data List / Active Test [09/2012 - ]

HINT: 

Using the Techstream to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG) and turn the Techstream on.
3. Enter the following menus: Body Electrical / (desired system) / Data List.
4. According to the display on the Techstream, read the "Data List".
   MAIN BODY:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Communication D-Door Motor	Connection status between power window regulator motor (for driver side) and main body ECU / OK or STOP	OK: Connection STOP: No connection	When there is malfunction, DTC is output
   Communication P-Door Motor	Connection status between power window regulator motor (for front passenger side) and main body ECU / OK or STOP	OK: Connection STOP: No connection	When there is malfunction, DTC is output
   Communication RR-Door Motor	Connection status between power window regulator motor (for rear RH) and main body ECU / OK or STOP	OK: Connection STOP: No connection	When there is malfunction, DTC is output
   Communication RL-Door Motor	Connection status between power window regulator motor (for rear LH) and main body ECU / OK or STOP	OK: Connection STOP: No connection	When there is malfunction, DTC is output
   Communication Slide Roof	Connection status between sliding roof ECU and main body ECU / OK or STOP	OK: Connection STOP: No connection	When there is malfunction, DTC is output
   Communication Master SW	Connection status between power window ECU (master switch) and main body ECU / OK or STOP	OK: Connection STOP: No connection	When there is malfunction, DTC is output

   BODY NO. 5:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   LIN Communication	Status of LIN communication / Without or With	Without: No connection With: Connection	-

   BODY NO. 4:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   LIN Communication	Status of LIN communication / Without or With	Without: No connection With: Connection	When there is malfunction, DTC is output

   D-SEAT SW:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Communication FR Seat A/C	Current communication with seat climate control controller RH (for driver side) / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output
   Communication FL Seat A/C	Current communication with seat climate control controller LH (for front passenger side) / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output
   Communication Center Console Switch	Current communication with No. 1 console switch / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output

   REAR CONSOLE SWITCH:
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Communication RR Seat	Current communication with position control ECU (for rear RH) / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output
   Communication RL Seat	Current communication with position control ECU (for rear LH) / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output
   Communication RR Seat A/C	Current communication with seat climate control controller RH (for rear RH) / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output
   Communication RL Seat A/C	Current communication with seat climate control controller LH (for rear LH) / WITHOUT or WITH	WITHOUT: No connection WITH: Connection	When there is malfunction, DTC is output