LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2013 >> RX 350 Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System (Diagnostics - Introduction) >> Power Steering System >> DTC Check / Clear [03/2012 - ] >> DTC Check / Clear [03/2012 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [03/2012 - ]

  1. CHECK DTC 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Turn the Techstream on.
    5. Read the DTCs following the display on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.
    6. Refer to Diagnostic Trouble Code Chart for DTC information. Refer to DIAGNOSTIC TROUBLE CODE CHART [03/2012 - ] .
  2. CLEAR DTC 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Turn the Techstream on.
    5. Clear the DTCs following the display on the Techstream. Enter the following menus: Chassis / EMPS / Trouble Codes.
    6. According to the display on the Techstream, select the trouble code data display with the clear button.
    7. Turn the engine switch off.
    8. Disconnect the Techstream from the DLC3.
scientia non olet · About LEMON Manuals