LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2014 >> IS 250 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission System (A960E) - Service Information >> Combination Switch >> Installation [04/2013 - 08/2015] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [04/2013 - 08/2015]: Procedure

  1. INSTALL CLIP 

    HINT: 

    Perform this procedure only when replacement of the clip is necessary.

    1. Install the 4 clips to the combination switch assembly.
  2. INSTALL COMBINATION SWITCH ASSEMBLY 
    1. Engage the 7 claws to install the combination switch assembly to the upper console panel sub-assembly.
  3. INSTALL LEXUS DISPLAY AUDIO CONTROLLER (for Radio and Display Type) 

    Refer to PROCEDURE - Step 1

  4. INSTALL REMOTE TOUCH (for Multi-Media Module Receiver Type) 

    Refer to PROCEDURE - Step 1

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  6. INSTALL FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 11

  7. INSTALL FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 10

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 13

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 12

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

scientia non olet · About LEMON Manuals