Precaution [06/2014 - 10/2016]
- PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected:
System See Procedure Variable Gear Ratio Steering System Refer to INITIALIZATION [06/2014 - 08/2015] , or refer to INITIALIZATION [08/2015 - 10/2016] Parking Assist Monitor System Air Conditioning System - GENERAL PRECAUTION
Perform zero point calibration and sensitivity check if any of the following conditions occur:
- The occupant detection ECU is replaced.
- Accessories (seatback tray, seat cover, etc.) are installed.
- The front passenger seat is removed from the vehicle.
- One of the bolts that is used to install the front passenger seat is removed and reinstalled.
- The passenger airbag ON/OFF indicator ("ON") comes on when the front passenger seat is not occupied.
- An occupant classification sensor collision detection DTC is output due to an accident or a collision.