DTC Check / Clear [08/2013 - ]
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
- Read the DTC by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
- Clear the DTC by following the directions on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.