LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2014 >> IS 350C Base >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Rear View Monitor System (Diagnostics) (Introduction) >> Rear View Monitor System >> DTC Check / Clear [08/2013 - ] >> DTC Check / Clear [08/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2013 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
    5. Check for DTCs, and then write them down.
    6. Check for DTCs. Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2013 - ] .
      NOTE:

      The multi-media module receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the rear view monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

      System Proceed to
      Navigation System Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2013 - ]
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals