All Power Windows Do Not Operate With Driver Side Door Key Cylinder Or Wireless Transmitter [08/2013 - ]: Procedure

CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM)

Check that the wireless transmitter. Refer to OPERATION CHECK [08/2013 - ] and driver door key cylinder (key linked switch). Refer to OPERATION CHECK [08/2013 - ] lock and unlock all the doors normally.

Result

Result	Proceed to
Transmitter and driver door key cylinder operate normally	A
Transmitter does not operate normally	B
Driver door key cylinder does not operate normally	C

B → See step 4

C → See step 5

A: Go to next step

CHECK MANUAL UP / DOWN FUNCTION
1. Check that the manual up/down function using the multiplex network master switch assembly and power window regulator switch assembly can operate all the power windows. Refer to OPERATION CHECK [08/2013 - ] .
  OK
  
  Manual up/down function is normal.
NG → See step 6

OK: Go to next step
CHECK REMOTE UP / DOWN FUNCTION
1. Check that the remote up/down function using the multiplex network master switch assembly operates the power windows. Refer to OPERATION CHECK [08/2013 - ] .
  OK
  
  Remote up/down function is normal.
NG → See step 6

OK → See step 7
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ]
GO TO POWER DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ]
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ]
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [08/2013 - ]