Customize Parameters [08/2013 - ]

HINT: 

• When the customer requests a change in a function, first make sure that the function can be customized.
• Be sure to make a note of the current settings before customizing.
• When troubleshooting a function, first make sure that the function is set to the default setting.

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Utility / Customize Setting.
5. Select the setting by referring to the table below.
   MAIN BODY
   
   

   Tester Display	Default	Content	Setting
   Seat Move Distance	Standard	Allows customizing of the seat movement distance for the power easy access system.	OFF / Little / Standard

HINT: 

The items in the table below can be customized.

1. Customizing with the multi-display
   1. Turn the engine switch on (IG).
   2. Enter the following menus: Menu / Setup / Vehicle / Vehicle Settings / Vehicle Customization / Other Vehicle Settings
   3. Select the setting by referring to the table below.

      Display	Default	Content	Setting	Relevant ECU
      Driver's Seat Easy Exit	Full	Allows customizing of the seat movement distance for the power easy access system.	Full / Partial / Off	Front power seat switch (driver side)

HINT: 

• Press the UP/DOWN switch on the steering pad switch assembly when changing an item selection.
• Press the ENTER switch on the steering pad switch assembly when selecting an item.

1. Turn the engine switch on (IG).
2. Press and hold the MENU switch on the steering pad switch assembly.
3. Select the setting by referring to the table below

   Display	Default	Content	Setting	Relevant ECU
   DRIVER'S SEAT EASY EXIT	FULL	Allows customizing of the seat movement distance for the power easy access system.	FULL / PARTIAL / OFF	Front power seat switch (driver side)

4. Press the ENTER switch on the steering pad switch assembly.
5. The setting completion screen will be displayed.
6. Return to the item selection screen.