LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> CT 200h Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> Yaw Rate And Acceleration Sensor >> Removal [08/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2014 - ]: Procedure

  1. PRECAUTION 
    NOTE:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal, Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work (See article. Refer to PRECAUTION [08/2014 - ] ).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    (See article. Refer to REMOVAL [08/2014 - ] )

  3. REMOVE REAR CONSOLE BOX ASSEMBLY 

    (See article. Refer to REMOVAL [08/2014 - ] )

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 16

  5. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 17

  6. REMOVE CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 20

  7. REMOVE CONSOLE BOX LH 

    Refer to PROCEDURE - Step 21

  8. REMOVE YAW RATE AND ACCELERATION SENSOR 
    1. Remove the 2 bolts and yaw rate and acceleration sensor.
      GTY354890Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector from the yaw rate and acceleration sensor.
scientia non olet · About LEMON Manuals