Precaution [08/2014 - ]
- PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL NOTE:
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected:
System See Procedure Parking Assist Monitor System (w/ Parallel Parking Assist Function) Refer to INITIALIZATION [08/2014 - ] Parking Assist Monitor System (w/o Parallel Parking Assist Function) Power Trunk Lid System - GENERAL PRECAUTION
Perform zero point calibration and sensitivity check if any of the following conditions occur:
- The occupant detection ECU is replaced.
- Accessories (seatback tray and seat cover, etc.) are installed.
- The front passenger seat is removed from the vehicle.
- One of the bolts that is used to install the front passenger seat is removed and reinstalled.
- The vehicle is brought to the workshop for repair due to an accident or a collision.