DTC P2610: ECM / PCM Internal Engine Off Timer Performance [09/2014 - 10/2015]: Procedure

1. Replace the ECM (Refer to REMOVAL [09/2014 - 10/2015] ).

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs (Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).
5. Turn the engine switch off and wait for at least 30 seconds.
6. Turn the engine switch on (IG).
7. Turn the Techstream on.
8. Start the engine and wait for 10 minutes or more.
9. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes / Pending.
10. If no pending DTC is displayed, the repair has been successfully completed.

Result: 

NEXT 

END