DTC P0111: Intake Air Temperature Sensor 1 Circuit Range / Performance [09/2014 - 10/2015]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.

   Result

   Result	Proceed to
   DTC P0111 and other DTCs are output	A
   DTC P0111 is output	B

   HINT: 

   • If any DTCs other than P0111 are output, troubleshoot those DTCs first.
   • Perform "Inspection After Repair" after replacing the mass air flow meter (Refer to INITIALIZATION [09/2014 - 10/2015] ).

Result: 

A 

GO TO DTC CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] )

Result: 

B 

REPLACE MASS AIR FLOW METER 

(Refer to REMOVAL [09/2014 - 10/2015] )