Rear Differential Carrier Assembly (For 4GR-FSE)
REAR DIFFERENTIAL CARRIER ASSEMBLY (FOR 4GR-FSE)
| Rear differential carrier oil seal drive in depth | 1.55 to 2.45 mm (0.0610 to 0.0964 in.) | |
| Rear differential side gear shaft oil seal drive in depth | -0.5 to 0.5 mm (-0.0197 to 0.0196 in.) | |
| Differential ring gear runout | 0.07 mm (0.00275 in.) | |
| Differential ring gear backlash | 0.13 to 0.18 mm (0.00512 to 0.00708 in.) | |
| Companion flange runout | Vertical | 0.09 mm (0.00354 in.) |
| Lateral | 0.09 mm (0.00354 in.) | |
| Adjust differential drive pinion preload (at starting) | New bearing: 1.77 to 2.14 N*m (18.0 to 21.8 kgf*cm, 15.7 to 18.9 in.*lbf) Reused bearing: 1.77 to 2.07 N*m (18.0 to 21.1 kgf*cm, 15.7 to 18.3 in.*lbf) |
|
| Inspect total preload (at starting) | 2WD | New differential case bearing x New rear drive pinion tapered roller bearing: 2.17 to 2.84 N*m (22.1 to 29.0 kgf*cm, 19.2 to 25.1 in.*lbf) New differential case bearing x Reused rear drive pinion tapered roller bearing: 2.17 to 2.77 N*m (22.1 to 28.4 kgf*cm, 19.2 to 24.5 in.*lbf) Reused differential case bearing x New rear drive pinion tapered roller bearing: 2.09 to 2.73 N*m (21.3 to 27.8 kgf*cm, 18.5 to 24.2 in.*lbf) Reused differential case bearing x Reused rear drive pinion tapered roller bearing: 2.09 to 2.66 N*m (21.3 to 27.1 kgf*cm, 18.5 to 23.5 in.*lbf) |
| AWD | New differential case bearing x New rear drive pinion tapered roller bearing: 2.14 to 2.77 N*m (21.8 to 28.4 kgf*cm, 18.9 to 24.5 in.*lbf) New differential case bearing x Reused rear drive pinion tapered roller bearing: 2.14 to 2.70 N*m (21.8 to 27.5 kgf*cm, 18.9 to 23.9 in.*lbf) Reused differential case bearing x New rear drive pinion tapered roller bearing: 2.06 to 2.67 N*m (21.0 to 27.2 kgf*cm, 18.2 to 23.6 in.*lbf) Reused differential case bearing x Reused rear drive pinion tapered roller bearing: 2.06 to 2.60 N*m (21.0 to 26.5 kgf*cm, 18.2 to 23.0 in.*lbf) |
|
| Differential drive pinion preload (at starting) | New bearing: 1.87 to 2.24 N*m (19.1 to 22.8 kgf*cm, 16.6 to 19.8 in.*lbf) Reused bearing: 1.87 to 2.17 N*m (19.1 to 22.1 kgf*cm, 16.6 to 19.2 in.*lbf) |
|
| Inspect total preload (at starting) | 2WD | New differential case bearing x New rear drive pinion tapered roller bearing: 2.27 to 2.94 N*m (23.1 to 30.0 kgf*cm, 20.1 to 26.0 in.*lbf) New differential case bearing x Reused rear drive pinion tapered roller bearing: 2.27 to 2.87 N*m (23.1 to 29.3 kgf*cm, 20.1 to 25.4 in.*lbf) Reused differential case bearing x New rear drive pinion tapered roller bearing: 2.19 to 2.83 N*m (22.3 to 28.9 kgf*cm, 19.4 to 25.0 in.*lbf) Reused differential case bearing x Reused rear drive pinion tapered roller bearing: 2.19 to 2.76 N*m (22.3 to 28.1 kgf*cm, 19.4 to 24.4 in.*lbf) |
| AWD | New differential case bearing x New rear drive pinion tapered roller bearing: 2.24 to 2.87 N*m (22.8 to 29.3 kgf*cm, 19.8 to 25.4 in.*lbf) New differential case bearing x Reused rear drive pinion tapered roller bearing: 2.24 to 2.80 N*m (22.8 to 28.6 kgf*cm, 19.8 to 24.8 in.*lbf) Reused differential case bearing x New rear drive pinion tapered roller bearing: 2.16 to 2.77 N*m (22.0 to 28.2 kgf*cm, 19.1 to 24.5 in.*lbf) Reused differential case bearing x Reused rear drive pinion tapered roller bearing: 2.16 to 2.70 N*m (22.0 to 27.5 kgf*cm, 19.1 to 23.9 in.*lbf) |
|
| Rear differential side gear shaft plate washer thickness | 01 | 2.57 to 2.59 mm (0.1012 to 0.1020 in.) |
| 32 | 2.59 to 2.61 mm (0.1020 to 0.1028 in.) | |
| 33 | 2.61 to 2.63 mm (0.1028 to 0.1035 in.) | |
| 03 | 2.63 to 2.65 mm (0.1035 to 0.1043 in.) | |
| 34 | 2.65 to 2.67 mm (0.1043 to 0.1051 in.) | |
| 35 | 2.67 to 2.69 mm (0.1051 to 0.1059 in.) | |
| 05 | 2.69 to 2.71 mm (0.1059 to 0.1067 in.) | |
| 36 | 2.71 to 2.73 mm (0.1067 to 0.1075 in.) | |
| 37 | 2.73 to 2.75 mm (0.1075 to 0.1083 in.) | |
| 07 | 2.75 to 2.77 mm (0.1083 to 0.1091 in.) | |
| 38 | 2.77 to 2.79 mm (0.1091 to 0.1098 in.) | |
| 39 | 2.79 to 2.81 mm (0.1098 to 0.1106 in.) | |
| 09 | 2.81 to 2.83 mm (0.1106 to 0.1114 in.) | |
| 40 | 2.83 to 2.85 mm (0.1114 to 0.1122 in.) | |
| 41 | 2.85 to 2.87 mm (0.1122 to 0.1130 in.) | |
| 11 | 2.87 to 2.89 mm (0.1130 to 0.1138 in.) | |
| 42 | 2.89 to 2.91 mm (0.1138 to 0.1146 in.) | |
| 43 | 2.91 to 2.93 mm (0.1146 to 0.1154 in.) | |
| 13 | 2.93 to 2.95 mm (0.1154 to 0.1161 in.) | |
| 44 | 2.95 to 2.97 mm (0.1161 to 0.1169 in.) | |
| 45 | 2.97 to 2.99 mm (0.1169 to 0.1177 in.) | |
| 15 | 2.99 to 3.01 mm (0.1177 to 0.1185 in.) | |
| 46 | 3.01 to 3.03 mm (0.1185 to 0.1193 in.) | |
| 47 | 3.03 to 3.05 mm (0.1193 to 0.1201 in.) | |
| 17 | 3.05 to 3.07 mm (0.1201 to 0.1209 in.) | |
| 48 | 3.07 to 3.09 mm (0.1209 to 0.1217 in.) | |
| 49 | 3.09 to 3.11 mm (0.1217 to 0.1224 in.) | |
| 19 | 3.11 to 3.13 mm (0.1224 to 0.1232 in.) | |
| 50 | 3.13 to 3.15 mm (0.1232 to 0.1240 in.) | |
| 51 | 3.15 to 3.17 mm (0.1240 to 0.1248 in.) | |
| 21 | 3.17 to 3.19 mm (0.1248 to 0.1256 in.) | |
| 52 | 3.19 to 3.21 mm (0.1256 to 0.1264 in.) | |
| 53 | 3.21 to 3.23 mm (0.1264 to 0.1271 in.) | |
| 23 | 3.23 to 3.25 mm (0.1271 to 0.1280 in.) | |
| 54 | 3.25 to 3.27 mm (0.1280 to 0.1287 in.) | |
| 55 | 3.27 to 3.29 mm (0.1287 to 0.1295 in.) | |
| 25 | 3.29 to 3.31 mm (0.1295 to 0.1303 in.) | |
| 56 | 3.31 to 3.33 mm (0.1303 to 0.1311 in.) | |
| 57 | 3.33 to 3.35 mm (0.1311 to 0.1319 in.) | |
| 27 | 3.35 to 3.37 mm (0.1319 to 0.1327 in.) | |
| 58 | 3.37 to 3.39 mm (0.1327 to 0.1335 in.) | |
| 59 | 3.39 to 3.41 mm (0.1335 to 0.1343 in.) | |
| 29 | 3.41 to 3.43 mm (0.1343 to 0.1350 in.) | |
| 60 | 3.43 to 3.45 mm (0.1350 to 0.1358 in.) | |
| 61 | 3.45 to 3.47 mm (0.1358 to 0.1366 in.) | |
| 31 | 3.47 to 3.49 mm (0.1366 to 0.1374 in.) | |
| Rear differential drive pinion plate washer thickness | 1.69 to 1.71 mm (0.0665 to 0.0673 in.) | |
| 1.72 to 1.74 mm (0.0677 to 0.0685 in.) | ||
| 1.75 to 1.77 mm (0.0688 to 0.0697 in.) | ||
| 1.78 to 1.80 mm (0.0701 to 0.0709 in.) | ||
| 1.81 to 1.83 mm (0.0713 to 0.0720 in.) | ||
| 1.84 to 1.86 mm (0.0724 to 0.0732 in.) | ||
| 1.87 to 1.89 mm (0.0736 to 0.0744 in.) | ||
| 1.90 to 1.92 mm (0.0748 to 0.0756 in.) | ||
| 1.93 to 1.95 mm (0.0760 to 0.0768 in.) | ||
| 1.96 to 1.98 mm (0.0772 to 0.0780 in.) | ||
| 1.99 to 2.01 mm (0.0783 to 0.0791 in.) | ||
| 2.02 to 2.04 mm (0.0795 to 0.0803 in.) | ||
| 2.05 to 2.07 mm (0.0807 to 0.0815 in.) | ||
| 2.08 to 2.10 mm (0.0819 to 0.0827 in.) | ||
| 2.11 to 2.13 mm (0.0831 to 0.0839 in.) | ||
| 2.14 to 2.16 mm (0.0843 to 0.0850 in.) | ||
| 2.17 to 2.19 mm (0.0854 to 0.0862 in.) | ||
| 2.20 to 2.22 mm (0.0866 to 0.0874 in.) | ||
| 2.23 to 2.25 mm (0.0878 to 0.0886 in.) | ||
| 2.26 to 2.28 mm (0.0890 to 0.0898 in.) | ||
| 2.29 to 2.31 mm (0.0902 to 0.0909 in.) | ||
| 2.32 to 2.34 mm (0.0913 to 0.0921 in.) | ||