Installation [04/2013 - 10/2017]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Lexus IS 350, 2017 Lexus IS 300, 2016 Lexus IS 350, 2016 Lexus IS 300, and 2015 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL KNOCK CONTROL SENSOR

HINT:

Perform "Inspection After Repair" after replacing a knock control sensor.

Refer to INITIALIZATION [04/2013 - 10/2017]

Install the 2 knock control sensors to the cylinder block sub-assembly with the 2 bolts so that the knock control sensor installation position is as shown in the illustration.

Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)

NOTE:

Make sure that each knock control sensor is in the correct position.

*A	For Bank 1
*B	For Bank 2
*a	View A
*b	View B
*c	Top
*d	Engine Front
*e	Engine Rear
	Front
	View A
	View B

Connect the 2 knock control sensor connectors.

INSTALL FUEL INJECTOR SEAL
Refer to INSTALLATION [04/2013 - 10/2017]
PERFORM INITIALIZATION
1. Perform "Inspection After Repair" after replacing a knock control sensor.
  Refer to INITIALIZATION [04/2013 - 10/2017]