LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> IS 250 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Control System (2GR-FSE) - Service Information) >> Knock Sensor >> Removal [04/2013 - 10/2017] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [04/2013 - 10/2017]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Lexus IS 350, 2017 Lexus IS 300, 2016 Lexus IS 350, 2016 Lexus IS 300, and 2015 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL INJECTOR SEAL 

    Refer to REMOVAL [04/2013 - 10/2017]

  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      GTY471224Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Engine Front
    2. Remove the 2 bolts and 2 knock control sensors from the cylinder block sub-assembly.
scientia non olet · About LEMON Manuals