DTC P0604: Random Access Memory (RAM) [10/2014 - ]: Procedure

CHECK DTC
1. Clear DTC. Refer to DTC CHECK / CLEAR [10/2014 - ] .
2. Turn the engine switch off.
3. Disconnect the negative (-) battery terminal and wait for 1 minute. Refer to PRECAUTION [10/2014 - ] .
4. Connect the negative (-) battery terminal. Refer to PRECAUTION [10/2014 - ] .
5. Turn the engine switch on (IG).
6. Connect the Techstream to the DLC3.
7. Turn the Techstream on.
8. Wait 16 seconds or more.
9. Enter the following menus: Powertrain / Engine / Trouble Codes.
10. Check DTC.
  OK
  
  P0604 is not present.
NG → See step 3

OK → See step 2
CHECK FOR INTERMITTENT PROBLEMS. Refer to CHECK FOR INTERMITTENT PROBLEMS [10/2014 - ]
REPLACE ECM. Refer to REMOVAL [10/2014 - ]