DTC P1023: Camshaft Position Signal Output "B" Circuit; DTC P2614: Camshaft Position Signal Output Circuit / Open [10/2014 - ]: Procedure

1. Replace the camshaft timing control motor. Refer to REMOVAL [10/2014 - ] .

NEXT: Go to next step 

1. Connect the Techstream to the DLC3.
2. Drive the vehicle in accordance with the driving pa described in the Confirmation Driving Pattern.
3. Enter the following menus: Powertrain / Engine / Trouble Codes.
4. Read the DTCs.

   Result

   Display (DTC Output)	Proceed to
   No output	A
   Other DTCs	B

B → See step   3 

A → END