LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> LS 460 L, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System (Diagnostics - Introduction) >> Power Steering System >> Freeze Frame Data [10/2014 - ] >> Freeze Frame Data [10/2014 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [10/2014 - ]

  1. FREEZE FRAME DATA 
    NOTE:
    • It is difficult to show the specified values (judgment values) clearly because freeze frame data values change significantly due to differences in measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
    • Turn the engine switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the Techstream.
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG) and check the freeze frame data by following the prompts on the Techstream's display screen.
      EMPS

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Meter Vehicle Velocity Vehicle speed from meter/
      Min.: 0.0 km/h (0.0 mph), Max.: 300.0 km/h (186.0 mph)
      1. Vehicle is stopped: 0.0 km/h (0.0 mph)
      2. Vehicle is driven at a constant speed: No significant fluctuation
      		 -
      Engine Revolution Engine speed/
      Min.: 0 rpm, Max.: 12800 rpm      		 Engine is running at a constant speed: No significant fluctuation -
      Motor Actual Current Amount of current to motor/
      Min.: -327.68 A, Max.: 327.67 A      		 Power steering is in operation: Value changes in proportion to steering effort When malfunction occurs, problem may be in steering system
      Command Value Current Demanded amount of current to motor/
      Min.: -327.68 A, Max.: 327.67 A      		 Power steering is in operation: Value changes in proportion to steering effort When malfunction occurs, problem may be in steering system
      Steering Angle Velocity Steering angle speed/
      Min.: -32768 deg/s, Max.: 32767 deg/s      		 Steering wheel is turned: Value changes in proportion to steering speed -
      Thermistor Temperature ECU substrate temperature/
      Min.: -50.0°C, Max.: 150.0°C      		 Equivalent to ambient ECU substrate temperature -
      IG Power Supply ECU power source voltage/
      Min.: 0.0000 V, Max.: 20.1531 V      		 Engine switch on (IG): 11 to 14 V -
      Torque Sensor 1 Output Torque sensor 1 rotation angle/
      Min.: 0.000 deg, Max.: 360.000 deg      		 Steering wheel is turned: Value changes from 0 to 360° every 22.5° of steering angle When malfunction occurs, problem may be in torque sensor
      Torque Sensor 2 Output Torque sensor 2 rotation angle/
      Min.: 0.000 deg, Max.: 360.000 deg      		 Steering wheel is turned: Value changes from 0 to 360° every 22.5° of steering angle When malfunction occurs, problem may be in torque sensor
      TRQ1 Zero Point Value Zero point value of torque sensor 1/
      Min.: 0.000 deg, Max.: 360.000 deg      		 Steering wheel is not turned
      (without load)      		 When malfunction occurs, problem may be in torque sensor
      TRQ2 Zero Point Value Zero point value of torque sensor 2/
      Min.: 0.000 deg, Max.: 360.000 deg      		 Steering wheel is not turned
      (without load)      		 When malfunction occurs, problem may be in torque sensor
      Steering Wheel Torque Steering torque/
      Min.: -7.00 Nm, Max.: 7.00 Nm      		 Steering wheel is turned: Value changes in proportion to steering effort When malfunction occurs, problem may be in torque sensor
      Motor Rotation Angle Motor rotation angle/
      Min.: 0.000 deg, Max.: 360.000 deg      		 Steering wheel is turned: Value changes from 0 to 360° every 5° of steering angle When malfunction occurs, problem may be in rotation angle sensor
      Command Val Current 2 Amount of current demanded by motor 2/
      Min.: -327.68 A, Max.: 327.67 A      		 Power steering is in operation: Value changes in proportion to steering effort When malfunction occurs, problem may be in power steering motor.
      Motor Voltage Motor power source voltage/
      Min.: 0.000 V, Max.: 98.000 V      		 Power steering is in operation: 2 to 48 V -
      Motor Terminal Volt (U) Motor terminal voltage (U phase)/
      Min.: 0.000 V, Max.: 98.000 V      		 Power steering is in operation: 2 to 48 V When malfunction occurs, problem may be in power steering motor.
      Motor Terminal Volt (V) Motor terminal voltage (V phase)/
      Min.: 0.000 V, Max.: 98.000 V      		 Power steering is in operation: 2 to 48 V When malfunction occurs, problem may be in power steering motor.
      Motor Terminal Volt (W) Motor terminal voltage (W phase)/
      Min.: 0.000 V, Max.: 98.000 V      		 Power steering is in operation: 2 to 48 V When malfunction occurs, problem may be in power steering motor.
      Battery Voltage Battery voltage/
      Min.: 0.0 V, Max.: 25.5 V      		 11 to 14 V -
      DC-DC Warning Signal 42 V DC / DC converter warning signal/
      OK, NG(1) or NG(2)      		 OK, NG(1) or NG(2) -
      PS Assist Signal Power steering assist signal/
      ON or OFF      		 ON or OFF -
      Motor Actual Current 2 Amount of current to motor 2/
      Min.: -327.68 A, Max.: 327.67 A      		 Power steering is in operation: Value changes in proportion to steering effort When malfunction occurs, problem may be in power steering motor.
scientia non olet · About LEMON Manuals