LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> NX 300h AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostic Codes & Circuit Tests >> Pre-Collision System >> DTC U0125: Lost Communication with Yaw Rate Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0293: Lost Communication with Hybrid Vehicle Control System [10/2014 - 09/2017] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0125: Lost Communication with Yaw Rate Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0293: Lost Communication with Hybrid Vehicle Control System [10/2014 - 09/2017]: Description

The driving support ECU assembly uses the millimeter wave radar sensor assembly to detect obstacles in front of the vehicle. Based on this information, the driving support ECU assembly sends pre-collision control operation signals. These DTCs are stored when a communication malfunction occurs between the sensors and ECUs that detect crashes, or between ECUs that perform the pre-collision control.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0125 Lost Communication with Yaw Rate Sensor Module When the power switch is on (IG), a communication error between the airbag ECU assembly (yaw rate sensor) and the driving support ECU assembly is detected for approximately 1 second.
  • CAN communication system
  • Airbag ECU assembly (yaw rate sensor)
  • Driving support ECU assembly
U0126 Lost Communication with Steering Angle Sensor Module When the power switch is on (IG), a communication error between the spiral with sensor cable sub-assembly (steering angle sensor) and the driving support ECU assembly is detected for approximately 1 second.
  • CAN communication system
  • Spiral with sensor cable sub-assembly
  • Driving support ECU assembly
U0129 Lost Communication with Brake System Control Module When the power switch is on (IG), a communication error between the brake booster with master cylinder assembly (skid control ECU) and the driving support ECU assembly is detected for approximately 3 seconds.
  • CAN communication system
  • Brake booster with master cylinder assembly (skid control ECU)
  • Driving support ECU assembly
U0142 Lost Communication with Body Control Module "B" When the power switch is on (IG), a communication error between the main body ECU (multiplex network body ECU) and driving support ECU assembly is detected for approximately 11.2 seconds.
  • CAN communication system
  • Main body ECU (multiplex network body ECU)
  • Driving support ECU assembly
U0293 Lost Communication with Hybrid Vehicle Control System When the power switch is on (IG), a communication error between the hybrid vehicle control ECU and driving support ECU assembly is detected for approximately 11.2 seconds.
  • CAN communication system
  • Hybrid vehicle control ECU
  • Driving support ECU assembly
scientia non olet · About LEMON Manuals