LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> RC 350 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> ASC System - Diagnostics - Introduction >> ASC System >> Freeze Frame Data [09/2014 - 11/2017] >> Freeze Frame Data [09/2014 - 11/2017]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [09/2014 - 11/2017]

  1. FREEZE FRAME DATA 
    1. Whenever an ASC system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data.
  2. CHECK FREEZE FRAME DATA 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / ASC / Trouble Codes.
    5. According to the Techstream display, select a DTC that stored freeze frame data.
    6. Read the freeze frame data recorded when the DTC was stored.

      Body Electrical > ASC 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Sound State Dynamic engine sound output status Stopping or Sounding Stopping: Dynamic engine sound stopped
      Sounding: Dynamic engine sound being output      		 -
      Mute Mute setting OFF or ON OFF: Mute off
      ON: Mute on      		 -
      Gear Position (D Range) Gear position information 1st, 2nd, 3rd, 4th, 5th, 6th, 7th*1 or 8th*1 Actual gear position -
      Suppositional Engine Speed (Target Value) Calculated engine speed in the stereo component equalizer assembly Min.: 0 rpm
      Max.: 8000 rpm      		 Changes according to driving conditions (accelerator pedal opening angle, vehicle speed, etc.) -
      Volume SW Vehicle sound switch on/off status OFF or ON OFF: Vehicle sound switch off
      ON: Vehicle sound switch on      		 -
      Speaker Disconnection Inspection State of wire harness between stereo component equalizer assembly and No. 1 speaker assembly with box OFF or Inspecting OFF: Open not detected
      Inspecting: Open detected      		 -
      Volume Switch Voltage The VSLI terminal voltage to the CPU of the stereo compartment equalizer assembly Min.: 0 V
      Max.: 5 V      		 Changes according to vehicle sound switch volume setting -
      Pseudo Engine Revolution (HV ECU) Actual engine speed Min.: 0 rpm
      Max.: 12800 rpm      		 Actual engine speed *2
      Vehicle Speed Maximum wheel speed sensor reading Min.: 0 km/h
      Max.: 655.35 km/h      		 Actual vehicle speed -
      Accelerator Position Accelerator pedal opening angle Min.: 0 %
      Max.: 111.0 %      		 Actual accelerator pedal opening angle -
      Shift SW Status (P Range) Park/Neutral position switch status OFF or ON OFF: Shift lever in any position other than P
      ON: Shift lever in P      		 -
      Shift SW Status (R Range) Shift lever position (R) OFF or ON OFF: Shift lever in any position other than R
      ON: Shift lever in R      		 -
      Shift SW Status (D Range) Shift lever position (D) OFF or ON OFF: Shift lever in any position other than D
      ON: Shift lever in D      		 -
      Shift SW Status (N Range) Shift lever position (N) OFF or ON OFF: Shift lever in any position other than N
      ON: Shift lever in N      		 -
      Gear Position (Sports Mode) Gear position information with shift lever in M Not Sports Mode, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th*1 or 8th*1 Not Sports Mode: Shift lever in any position other than M
      1st: 1st gear selected
      2nd: 2nd gear selected
      3rd: 3rd gear selected
      4th: 4th gear selected
      5th: 5th gear selected
      6th: 6th gear selected
      7th: 7th gear selected*1
      8th: 8th gear selected*1      		 -
      Current Gear Position (D Range) Current gear position information 1st, 2nd, 3rd, 4th, 5th, 6th, 7th*1 or 8th*1 Current gear position displayed (1st, 2nd, 3rd, 4th, 5th, 6th, 7th*1 or 8th*1) -
      Integrated Sport Mode Indicator Drive mode (SPORT) status OFF or Lighting OFF: Drive mode other than SPORT mode selected
      Lighting: SPORT mode selected      		 -
      Sport Mode Indicator M position switch status OFF or Lighting OFF: Shift lever in any position other than M
      Lighting: Shift lever in M      		 -
      SNOW Mode Indicator SNOW mode indicator illumination status OFF or Lighting OFF: SNOW mode indicator not illuminated
      Lighting: SNOW mode indicator illuminated      		 -
      ECO Mode Indicator ECO mode indicator illumination status OFF or Lighting OFF: ECO mode indicator not illuminated
      Lighting: ECO mode indicator illuminated      		 -
      Engine Mode Engine operating status Stopped, Move to Stopping, Starting or Running Stopped: Engine stopped
      Move to Stopping: Engine attempting to stop
      Starting: Engine attempting to start
      Running: Engine running      		 *2
      EV Mode EV mode indicator illumination status OFF or Lighting OFF: EV mode indicator not illuminated
      Lighting: EV mode indicator illuminated      		 *2
      Integrated Sport Mode Status Drive mode (SPORT S or SPORT S+) status Not Sport, PWR & Chassis, Chassis or PWR Not Sport: Drive mode other than SPORT S or SPORT S+ mode selected
      PWR & Chassis: SPORT S+ mode selected
      PWR: SPORT S mode selected      		 -
      Engine Revolution Actual engine speed Min.: 0 rpm
      Max.: 1280 rpm      		 Actual engine speed -
      Gear Shifting Signal Shifting status OFF or ON OFF: Gear not being changed
      ON: Gear being changed      		 -
      Number of DTC Number of trouble codes Min.: 0
      Max.: 255      		 Number of DTCs displayed -

      HINT: 

      *1: for AA81E automatic transmission

      *2: Although the item is displayed on the Techstream, it is not applicable to this vehicle.

  3. CLEAR FREEZE FRAME DATA 
    NOTE:

    Clearing the DTCs will also clear the freeze frame data.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Clear the DTCs and freeze frame data.

      Refer to DTC CHECK / CLEAR [09/2014 - ] 

      Body Electrical > ASC > Clear DTCs 

scientia non olet · About LEMON Manuals