LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lighting System (Ext) - Diagnostics - Introduction) >> Lighting System >> Freeze Frame Data [10/2018 - 10/2022] >> Freeze Frame Data [10/2018 - 10/2022]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [10/2018 - 10/2022]

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. FREEZE FRAME DATA 
    1. Whenever a lighting system DTC is stored, the No. 1 headlight ECU sub-assembly LH stores the current vehicle state as freeze frame data.
  2. CHECK FREEZE FRAME DATA 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus:
      1. Body Electrical / HL AutoLeveling / Trouble Codes.

        Body Electrical > HL AutoLeveling > Trouble Codes 

    5. Select a DTC to display its freeze frame data.

      Body Electrical > HL AutoLeveling 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      +B No. 1 headlight ECU sub-assembly LH IG power supply voltage value 0.00 to 19.75 V 11.00 to 14.00 V -
      Height Sens Pw Supply Val Rear height control sensor sub-assembly LH power supply value 0.00 to 5.00 V 4.61 to 5.00 V -
      Rr Height Sens Signal Val Rear height control sensor sub-assembly LH signal value 0.00 to 5.00 V 0.50 to 4.50 V Value changes according to vehicle height
      +B Voltage Value Value changes according to vehicle height 0.00 to 19.75 V 11.00 to 14.00 V -
      Headlight Low Beam State Low beam headlight state OFF or ON OFF: Low beam headlights off
      ON: Low beam headlights on
      -
      Headlight High Beam State High beam headlight state OFF or ON OFF: High beam headlights off
      ON: High beam headlights on
      -
      DRL Operating State Daytime running light state OFF or ON OFF: Daytime running lights off
      ON: Daytime running lights on
      -
      Steering Sensor Signal Steering sensor signal value -384.0 to 382.5 deg Changes according to the operation of the steering wheel -
      Front Right Wheel Speed Value Front right wheel speed 0.00 to 260.00 km/h (162.00 mph) Condition can be displayed -
      Front Left Wheel Speed Value Front left wheel speed 0.00 to 260.00 km/h (162.00 mph) Condition can be displayed -
      Vehicle Acceleration Vehicle acceleration -445.64 to 445.63 m/s2 Condition can be displayed -
      Clearance Light State Parking light state OFF or ON OFF: Parking lights off
      ON: Parking lights on
      -
      Right Cornering Light/Front Side Illuminate Light State Cornering light RH state OFF or ON OFF: Cornering light RH off
      ON: Cornering light RH on
      -
      Left Cornering Light/Front Side Illuminate Light State Cornering light LH state OFF or ON OFF: Cornering light LH off
      ON: Cornering light LH on
      -
      Number Of Trouble Codes Number of stored DTCs when freeze frame data stored 0 to 255 Number of stored DTCs displayed -
  3. CLEAR FREEZE FRAME DATA 
    NOTE:

    Clearing the DTCs will also clear the freeze frame data.

    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Clear the DTCs and freeze frame data.
    4. Enter the following menus:
      1. Body Electrical / HL AutoLeveling / Clear DTCs.

        Body Electrical > HL AutoLeveling > Clear DTCs