DTC U0140: Lost Communication with Body Control Module; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U1115: Lost Communication with Tilt & Telescopic Module [09/2014 - ]: Procedure
- CLEAR DTC
- Clear the DTCs (Refer to DTC CHECK / CLEAR [09/2014 - ] ).
Result:
NEXT
See step 2
- CHECK FOR DTC
- Recheck for DTCs and check if the same DTCs are output again.
OK
No DTCs are output.
Result:
OK
USE SIMULATION METHOD TO CHECK
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )
Result:
NG
GO TO CAN COMMUNICATION SYSTEM
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )
- Recheck for DTCs and check if the same DTCs are output again.