DTC U0140: Lost Communication with Body Control Module; DTC U0155: Lost Communication with Instrument Panel Cluster (IPC) Control Module; DTC U1115: Lost Communication with Tilt & Telescopic Module [09/2014 - ]: Procedure
- CLEAR DTC
- Clear the DTCs (See page. Refer to DTC CHECK / CLEAR [09/2014 - ] ).
Result: NEXT
NEXT
See step 2
- CHECK FOR DTC
- Recheck for DTCs and check if the same DTCs are output again.
OK
No DTCs are output.
Result: OK
OK
USE SIMULATION METHOD TO CHECK
(See page. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )
Result: NG
NG
GO TO CAN COMMUNICATION SYSTEM
(See page. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )
- Recheck for DTCs and check if the same DTCs are output again.