LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> NX 200t Base, FWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostic Codes & Circuit Tests >> Pre-Collision System >> DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U012587: Lost Communication With Multi-axis Acceleration Sensor Module Missing Message; DTC U012687: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U012987: Lost Communication with Brake System Control Module Missing Message [05/2019 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U012587: Lost Communication With Multi-axis Acceleration Sensor Module Missing Message; DTC U012687: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U012987: Lost Communication with Brake System Control Module Missing Message [05/2019 - ]: Description

DTC No. Detection Item DTC Detection Condition Trouble Area
U010087 Lost Communication With ECM/PCM "A" Missing Message While the vehicle is being driven at 5 km/h (3 mph) or more, a communication error between the ECM and the forward recognition camera is detected for approximately 6 seconds or more. CAN communication system
U012587 Lost Communication With Multi-axis Acceleration Sensor Module Missing Message While the vehicle is being driven at 5 km/h (3 mph) or more, a communication error between the airbag ECU assembly and the forward recognition camera is detected for approximately 4 seconds or more. CAN communication system
U012687 Lost Communication with Steering Angle Sensor Module Missing Message 3 seconds after the engine switch is turned on (IG), a communication error between the steering sensor and the forward recognition camera is detected for approximately 1 second or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message 3 seconds after the engine switch is turned on (IG), a communication error between the skid control ECU (brake actuator assembly) and the forward recognition camera is detected for approximately 1 second or more. CAN communication system