Installation [09/2014 - 11/2017]: Procedure
WARNING: This page is about a different car, the 2017 Lexus RC 350, 2017 Lexus RC 300, 2016 Lexus RC 350, 2016 Lexus RC 300, and 2015 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL KNOCK CONTROL SENSOR
HINT:
Perform "Inspection After Repair" after replacing a knock control sensor.
Refer to INITIALIZATION [09/2014 - 11/2017]
- Install the 2 knock control sensors to the cylinder block sub-assembly with the 2 bolts so that the knock control sensor installation position is as shown in the illustration.
Torque: 20 N.m (204 kgf/cm, 15 ft.lbf)
*A for Bank 1 *B for Bank 2 *a View A *b View B *c Top *d Engine Front *e Engine Rear Front View A View B NOTE:- Make sure that each knock control sensor is in the correct position.
- If a knock control sensor has been struck or dropped, replace it.
- Connect the 2 knock control sensor connectors.
- Install the 2 knock control sensors to the cylinder block sub-assembly with the 2 bolts so that the knock control sensor installation position is as shown in the illustration.
- INSTALL FUEL INJECTOR ASSEMBLY
Refer to INSTALLATION [09/2014 - 11/2017]
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing a knock control sensor.
Refer to INITIALIZATION [09/2014 - 11/2017]
- Perform "Inspection After Repair" after replacing a knock control sensor.