LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> RC 350 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Automatic Headlight Beam Level Control System - Diagnostics - Introduction) >> Automatic Headlight Beam Level Control System >> Precaution [10/2018 - 10/2022] >> Precaution [10/2018 - 10/2022]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Precaution [10/2018 - 10/2022]

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

    System Name See Procedure
    Lane Departure Alert System (w/ Steering Control) Refer to INITIALIZATION [10/2018 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2022]
    Variable Gear Ratio Steering System
    Parking Assist Monitor System
    Pre-collision System
    Air Conditioning System
    Lighting System (EXT)
  2. PRECAUTIONS FOR AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM 
    1. If any of the following are performed, it is necessary to initialize the No. 1 headlight ECU sub-assembly LH.

      Refer to INITIALIZATION [10/2018 - ] 

      • Replacement of the rear height control sensor sub-assembly LH
      • Removal/installation of the rear height control sensor sub-assembly LH
      • Work that changes the vehicle height such as replacement of suspension components
    2. If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.

      Refer to INITIALIZATION [10/2018 - ]