DTC Check / Clear [07/2015 - ]
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Radar Cruise1*1 or Radar Cruise2*2 / Trouble Codes.
- Check the DTCs.
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Powertrain / Radar Cruise1*1 or Radar Cruise2*2 / Trouble Codes.
- Clear the DTCs.
- *1: Stored in the hybrid vehicle control ECU assembly
- *2: Stored in the driving support ECU Assembly