LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> LEXUS ENFORM System (Diagnostics - Introduction) >> LEXUS ENFORM System >> DTC Check / Clear [07/2015 - ] >> DTC Check / Clear [07/2015 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [07/2015 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Telematics / Trouble Codes.
    5. Check for DTCs, and then write them down.
    6. Check the details of the DTC(s) (Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ] ).
      NOTE:

      The LEXUS ENFORM system outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the LEXUS ENFORM system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

      System Proceed to
      Safety Connect System Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ]
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Telematics / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About LEMON Manuals