Jam Protection Function does not Operate [09/2014 - ]: Procedure

1. Initialize the power window regulator motor (Refer to INITIALIZATION [09/2014 - 10/2015] or refer to INITIALIZATION [10/2015 - ] ).
2. Check if the power window auto up/down function operates (Refer to OPERATION CHECK [09/2014 - 10/2015] or refer to OPERATION CHECK [10/2015 - ] ).

   OK

   Auto up/down function operates.

Result: 

NG 

GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) 

(Refer to PROBLEM SYMPTOMS TABLE [09/2014 - 10/2015] or refer to PROBLEM SYMPTOMS TABLE [10/2015 - ] )

Result: 

OK 

See step  2

1. Check if the jam protection function operates for the applicable power window.

   HINT: 

   The jam protection function does not operate between the fully closed position of the door glass and the position 4 mm (0.157 in.) below that.

   OK

   Jam protection function operates.

   RESULT
   
   

   Result	Proceed to
   OK	A
   NG (Front power window regulator motor assembly RH)	B
   NG (Front power window regulator motor assembly LH)	C
   NG (Rear power window regulator motor assembly RH)	D
   NG (Rear power window regulator motor assembly LH)	E

Result: 

A 

END 

Result: 

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2014 - 10/2015] or refer to REMOVAL [10/2015 - ] )

Result: 

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2014 - 10/2015] or refer to REMOVAL [10/2015 - ] )

Result: 

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2014 - 10/2015] or refer to REMOVAL [10/2015 - ] )

Result: 

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2014 - 10/2015] or refer to REMOVAL [10/2015 - ] )