LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> GS 200t Base >> Repair and Diagnosis >> Steering >> Power Steering >> Variable Gear Ratio Steering System - Service Information >> Steering Control Ecu >> Installation [09/2014 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [09/2014 - ]: Procedure

  1. INSTALL STEERING CONTROL ECU 
    1. Install the steering control ECU with the 2 bolts.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

    2. Connect the 4 connectors.
  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY 

    Refer to PROCEDURE - Step 17 [09/2014 - 10/2015] or refer to PROCEDURE - Step 16 [10/2015 - ]

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 18 [09/2014 - 10/2015] or refer to PROCEDURE - Step 17 [10/2015 - ]

  4. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 29 [09/2014 - 10/2015] or refer to PROCEDURE - Step 28 [10/2015 - ]

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 4

  6. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION 

    (Refer to CALIBRATION [09/2014 - ] )

  7. PERFORM INITIALIZATION 

    (Refer to INITIALIZATION [09/2014 - ] )

scientia non olet · About LEMON Manuals