DTC P0705-13: Transmission Range Sensor "A" Circuit Open; DTC P070562: Transmission Range Sensor "A" Signal Compare Failure [10/2015 - ]: Description

The park/neutral position switch assembly detects the shift lever position and sends signals to the ECM.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P070513	Transmission Range Sensor "A" Circuit Open	All switches are off simultaneously for NSW, P, R, N and D for 1 minute or more (2 trip detection logic).	Open or short in park/neutral position switch assembly circuit Park/neutral position switch assembly ECM	Comes on	DTC stored	SAE Code: P0705
P070562	Transmission Range Sensor "A" Signal Compare Failure	Either of the following conditions A or B is met (2 trip detection logic): A. One of the following conditions (a), (b) or (c) is met for 2 seconds or more: (a) Any 2 or more of the following signals are on simultaneously: P input signal R input signal D input signal (b) Any 2 or more of the following signals are on simultaneously: N input signal R input signal D input signal (c) Any 2 or more of the following signals are on simultaneously: NSW input signal R input signal D input signal B. Any of the following conditions is met for 2 seconds or more with the shift lever in M: NSW input signal is on P input signal is on N input signal is on R input signal is on	Open or short in park/neutral position switch assembly circuit Park/neutral position switch assembly Open or short in transmission control switch circuit Transmission control switch (transmission floor shift assembly) ECM	Comes on	DTC stored	SAE Code: P0705

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Memory

Note

P070513

Transmission Range Sensor "A" Circuit Open

All switches are off simultaneously for NSW, P, R, N and D for 1 minute or more (2 trip detection logic).

Open or short in park/neutral position switch assembly circuit
Park/neutral position switch assembly
ECM

Comes on

DTC stored

SAE Code: P0705

P070562

Transmission Range Sensor "A" Signal Compare Failure

Either of the following conditions A or B is met (2 trip detection logic):
A. One of the following conditions (a), (b) or (c) is met for 2 seconds or more:
(a) Any 2 or more of the following signals are on simultaneously:

P input signal
R input signal
D input signal

(b) Any 2 or more of the following signals are on simultaneously:

N input signal
R input signal
D input signal

NSW input signal
R input signal
D input signal

B. Any of the following conditions is met for 2 seconds or more with the shift lever in M:

NSW input signal is on
P input signal is on
N input signal is on
R input signal is on

Open or short in park/neutral position switch assembly circuit
Park/neutral position switch assembly
Open or short in transmission control switch circuit
Transmission control switch (transmission floor shift assembly)
ECM

Comes on

DTC stored

SAE Code: P0705