Installation [09/2014 - 10/2015]: Procedure
WARNING: This page is about a different car, the 2015 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
- Apply a light coat of engine oil to the O-ring of the VVT sensor.NOTE:
- When reusing the VVT sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.
- Install the VVT sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Connect the VVT sensor connector.
- Apply a light coat of engine oil to the O-ring of the VVT sensor.
- INSTALL VVT SENSOR (for Intake Side of Bank 2)
- Apply a light coat of engine oil to the O-ring of the VVT sensor.NOTE:
- When reusing the VVT sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.
- Install the VVT sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Connect the VVT sensor connector.
- Apply a light coat of engine oil to the O-ring of the VVT sensor.
- INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
- Apply a light coat of engine oil to the O-ring of the VVT sensor.NOTE:
- When reusing the VVT sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.
- Install the VVT sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Connect the VVT sensor connector.
- Apply a light coat of engine oil to the O-ring of the VVT sensor.
- INSTALL VVT SENSOR (for Intake Side of Bank 1)
- Apply a light coat of engine oil to the O-ring of the VVT sensor.NOTE:
- When reusing the VVT sensor, inspect the O-ring.
- Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.
- Install the VVT sensor with the bolt.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
- Connect the VVT sensor connector.
- Apply a light coat of engine oil to the O-ring of the VVT sensor.
- INSTALL V-BANK COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 119