Installation [09/2014 - 10/2015]: Procedure

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the cruise control main switch with the 2 screws.
2. Connect the connector.
3. Attach the clamp.
INSTALL STEERING PAD
Refer to PROCEDURE - Step 1
INSTALL LOWER NO. 3 STEERING WHEEL COVER
Refer to PROCEDURE - Step 2
INSTALL LOWER NO. 2 STEERING WHEEL COVER
Refer to PROCEDURE - Step 3
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2014 - 10/2015] ).
CHECK SRS WARNING LIGHT
(Refer to DIAGNOSIS SYSTEM [09/2014 - ] )