Inspection [10/2015 - ]: Procedure
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
*a Component without harness connected
(Throttle Body with Motor Assembly)- Check that the throttle valve opens and closes smoothly.
- Check that the there is no sludge accumulating around the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω If the result is not as specified, replace the throttle body with motor assembly.