Installation [09/2014 - ]: Procedure

INSTALL STEERING CONTROL ECU
1. Install the steering control ECU with the 2 bolts.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
2. Connect the 4 connectors.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Refer to PROCEDURE - Step 17 [09/2014 - 10/2015] or refer to PROCEDURE - Step 16 [10/2015 - ]
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 18 [09/2014 - 10/2015] or refer to PROCEDURE - Step 17 [10/2015 - ]
INSTALL INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 29 [09/2014 - 10/2015] or refer to PROCEDURE - Step 28 [10/2015 - ]
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 4
PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
(Refer to CALIBRATION [09/2014 - ] )
PERFORM INITIALIZATION
(Refer to INITIALIZATION [09/2014 - ] )