LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> GS 450h Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Dynamic Radar Cruise Control System (Diagnostics) (Introduction) >> Dynamic Radar Cruise Control System >> Freeze Frame Data [10/2015 - ] >> Freeze Frame Data [10/2015 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Freeze Frame Data [10/2015 - ]

  1. CHECK FREEZE FRAME DATA 

    HINT: 

    The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.

    1. Connect the Techstream to the DLC3.
    2. Turn the power switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
    5. From the DTC screen, select the DTCs (with snow icon) for which freeze frame data is recorded.
  2. LIST OF FREEZE FRAME DATA 
    RADAR CRUISE

    Tester Display Measurement Item Range Normal Condition Diagnostic Note
    Cruise Control Cruise control system operation signal ON or OFF ON: Dynamic radar cruise control system operating
    OFF: Dynamic radar cruise control system not operating
    -
    Cruise Control Mode Cruise control mode signal All Spd, Hi Spd or Normal All Spd: Vehicle-to-vehicle distance control mode (w/ full-speed following function)
    Hi Spd: Vehicle-to-vehicle distance control mode (w/o full-speed following function)
    Normal: Constant speed mode
    -
    CCS Mem Vehicle Spd Cruise control memorized speed min.: 0 km/h (0 mph), max.: 320 km/h (199 mph) Memorized speed:
    Cruise control activated
    -
    Vehicle Distance Distance to preceding vehicle min.: 0 m (0 ft.), max.: 255 m (836.65 ft.) Actual distance to vehicle -
    Vehicle Acceleration Accelerator pedal idle position signal min.: -5 m/s2, max.: 5 m/s2 Actual vehicle acceleration -
    Closed Throttle Position Accelerator pedal idle position signal ON or OFF ON: Accelerator pedal released
    OFF: Accelerator pedal depressed
    -
    ECM/PCM Command Origin of the drive force request Pedal, None or DS Pedal: Accelerator pedal depressed
    None: drive force not requested
    DS: Radar cruise control system operating
    -
    Max Val of Available DF Maximum value of available drive force min.: -65536 N, max.: 65534 N Actual available drive force maximum value -
    Min Val of Available DF Minimum value of available drive force min.: -65536 N, max.: 65534 N Actual available drive force minimum value -
    Forward Vhcl Relative Spd Vehicle ahead relative speed min.: -128 m/s, max.: 127 m/s Actual vehicle ahead relative speed -
    Vehicle Approach Warning Forward vehicle approach warning signal ON or OFF ON: Forward vehicle approaching
    OFF: Forward vehicle not approaching
    -
    Vhcl Stability Ctrl Buzz Skid control buzzer assembly operation signal ON or OFF ON: Skid control buzzer assembly operating
    OFF: Skid control buzzer assembly not operating
    -
    Forward Vehicle Detect Millimeter wave radar sensor assembly high temperature abnormality ON or OFF ON: Millimeter wave radar sensor assembly abnormal
    OFF: Millimeter wave radar sensor assembly normal
    -
    Front Radar Voltage Millimeter wave radar sensor assembly low voltage abnormality ON or OFF ON: Millimeter wave radar sensor assembly abnormal
    OFF: Millimeter wave radar sensor assembly normal
    -
    CCS Cancel by Low Spd Dynamic radar cruise control system (constant speed mode) low speed cancel signal ON or OFF ON: Low speed cancel signal ON
    OFF: Low speed cancel signal OFF
    -
    Cancl CCS by Com Delay Dynamic radar cruise control system (constant speed mode) cancel signal ON or OFF ON: Cancel signal ON
    OFF: Cancel signal OFF
    -
    Cancl CCS by RAM Malfnc Dynamic radar cruise control system (constant speed mode) cancel signal ON or OFF ON: Cancel signal ON
    OFF: Cancel signal OFF
    -
    A-CCS Cancl- Radar/Wip cruise control system (vehicle-tovehicle distance control mode) cancel signal ON or OFF ON: Cancel signal ON
    OFF: Cancel signal OFF
    -
    A-CCS Cancl-ORC Malf Brake hold system malfunction condition ON or OFF ON: Malfunctioning
    OFF: Normal
    -
    A-CCS Cancl-ORC Brake hold system malfunction condition ON or OFF ON: Malfunctioning
    OFF: Normal
    -
    A-CCS Cancl-Logical Err Logic malfunction condition between brakes and driving support ECU assembly ON or OFF ON: Malfunctioning
    OFF: Normal