Customize Parameters [09/2014 - ]: Procedure
- CUSTOMIZING WITH ACCESSORY METER ASSEMBLY
- Turn the power switch on (IG).
- Using the accessory meter assembly, select "Setup", "General", and then "Feedback Force" and change the customize setting.
Display Default Content Setting Relevant ECU Feedback Force 3 (middle bar) Feedback force setting of the remote touch* 1, 2, 3, 4 or 5 Multi-media module receiver assembly LEVEL1/LEVEL2/ LEVEL3/LEVEL4/LEVEL5 HINT:
*: The higher the set value, the stronger the remote touch feedback force becomes.