DTC B2313: Glass Position Initialization Incomplete [09/2014 - ]: Procedure

1. Initialize the power window regulator motor (Refer to INITIALIZATION [09/2014 - ] ).

Result:  NEXT

NEXT 

See step  2

1. Check for DTCs (Refer to DTC CHECK / CLEAR [09/2014 - ] ).

   OK

   DTC B2313 is not output.

   RESULT
   
   

   Result	Proceed to
   No DTCs output	A
   DTC output (Front power window RH)	B
   DTC output (Front power window LH)	C
   DTC output (Rear power window RH)	D
   DTC output (Rear power window LH)	E

Result:  A

A 

END (POWER WINDOW CONTROL SYSTEM HAS NOT BEEN INITIALIZED) 

Result:  B

B 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2014 - 10/2015] or REMOVAL [10/2015 - ] )

Result:  C

C 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2014 - 10/2015] or REMOVAL [10/2015 - ] )

Result:  D

D 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH 

(Refer to REMOVAL [09/2014 - 10/2015] or REMOVAL [10/2015 - ] )

Result:  E

E 

REPLACE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

(Refer to REMOVAL [09/2014 - 10/2015] or REMOVAL [10/2015 - ] )