Power Source Mode does not Change to ON (ACC) [09/2014 - ]: Procedure

CHECK HARNESS AND CONNECTOR (POWER MANAGEMENT CONTROL ECU - COWL SIDE JUNCTION BLOCK RH)
See step 3

Result: NG

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

Result: OK

OK

See step 2
INSPECT COWL SIDE JUNCTION BLOCK RH (RH-ACC RELAY)
See step 4

Result: NG

NG

REPLACE COWL SIDE JUNCTION BLOCK RH

Result: OK

OK

See step 3
INSPECT POWER MANAGEMENT CONTROL ECU
See step 5

Result: OK

OK

CHECK RELAY CONTACT SIDE CIRCUIT

Result: NG

NG

REPLACE POWER MANAGEMENT CONTROL ECU

(Refer to REMOVAL [09/2014 - ] )