Customize Parameters [08/2015 - ]: Procedure

HINT: 

The following items can be customized.

1. Customizing with the Techstream
   1. Connect the Techstream to the DLC3.
   2. Turn the engine switch on (IG).
   3. Turn the Techstream on.
   4. Enter the following menus: Customize Setting / Seat or Smart Key / Access.
   5. Select the setting by referring to the table below.

      Tester Display	Default	Content	Setting	Relevant ECU
      Seat Move Distance	Standard	Allows customization of the seat movement distance for the power easy access system.	OFF, Little or Standard	Front power seat switch LH (seat ECU)
      Seat Position / Tilt & Telesco memory recall setting	D Door	This customize function switches the condition of the seat position, mirror position and tilt and telescopic memory recall. Possible recall activation parameters are "driver door unlocked with smart entry and start system and opened" or "any door unlocked with smart entry and start system and opened".	D Door or ANY Door	Main body ECU

2. Customizing with Multi-display
   1. Turn the engine switch on (IG).
   2. Select the following menus: Setup / Vehicle / Vehicle Customization.
   3. Select the setting by referring to the table below.

      Tester Display	Default	Content	Setting	Relevant ECU
      Driver's Seat Easy Exit	Full	Allows customization of the seat movement distance for the power easy access system.	OFF, Partial or Full	Front power seat switch LH (seat ECU)

3. Customizing with Multi-information Display
   1. Turn the engine switch on (IG).
   2. With the vehicle stationary or at a vehicle speed of less than 8 km/h (4.9 mph), press and hold the menu switch on the steering pad switch to display the meter customize mode screen.
   3. Select the setting by referring to the table below.

      Tester Display	Default	Content	Setting	Relevant ECU
      DRIVER SEAT EASY-EXIT	FULL	Allows customization of the seat movement distance for the power easy access system.	OFF, PARTIAL or FULL	Front power seat switch LH (seat ECU)