Front Differential Carrier Assembly (For AWD)

FRONT DIFFERENTIAL CARRIER ASSEMBLY (FOR AWD)

Front differential carrier oil seal drive in depth		0.5 to 1.5 mm (0.0197 to 0.0590 in.)
Companion flange runout	Vertical	Maximum: 0.10 mm (0.00394 in.)
Companion flange runout	Lateral	Maximum: 0.10 mm (0.00394 in.)
Drive pinion preload (at starting)	New bearing	0.98 to 1.57 Nm (10.0 to 16.0 kgfcm, 8.7 to 13.8 in.*lbf)
Drive pinion preload (at starting)	Reused bearing	0.49 to 0.78 Nm (5.0 to 7.9 kgfcm, 4.3 to 6.9 in.*lbf)
Total preload (at starting)	New bearing	1.27 to 2.06 Nm (13.0 to 21.0 kgfcm, 11.2 to 18.2 in.*lbf)
Total preload (at starting)	Reused bearing	0.78 to 1.27 Nm (8.0 to 12.9 kgfcm, 6.9 to 11.2 in.*lbf)
Differential ring gear backlash		0.08 to 0.16 mm (0.00315 to 0.00629 in.)
Side gear backlash		0.05 to 0.20 mm (0.00197 to 0.00787 in.)
No. 1 differential side gear thrust washer thickness	14	0.93 to 0.97 mm (0.0367 to 0.0381 in.)
	02	0.98 to 1.02 mm (0.0386 to 0.0401 in)
	15	1.03 to 1.07 mm (0.0406 to 0.0421 in.)
	03	1.08 to 1.12 mm (0.0426 to 0.0440 in.)
	16	1.13 to 1.17 mm (0.0445 to 0.0460 in.)
	04	1.18 to 1.22 mm (0.0465 to 0.0480 in.)
Front differential case plate washer thickness		2.21 to 2.23 mm (0.0870 to 0.0877 in.)
		2.23 to 2.25 mm (0.0878 to 0.0885 in.)
		2.25 to 2.27 mm (0.0886 to 0.0893 in.)
		2.27 to 2.29 mm (0.0894 to 0.0901 in.)
		2.29 to 2.31 mm (0.0902 to 0.0909 in.)
		2.31 to 2.33 mm (0.0910 to 0.0917 in.)
		2.33 to 2.35 mm (0.0918 to 0.0925 in.)
		2.35 to 2.37 mm (0.0926 to 0.0933 in.)
		2.37 to 2.39 mm (0.0934 to 0.0940 in.)
		2.39 to 2.41 mm (0.0941 to 0.0948 in.)
		2.41 to 2.43 mm (0.0949 to 0.0956 in.)
		2.43 to 2.45 mm (0.0957 to 0.0964 in.)
		2.45 to 2.47 mm (0.0965 to 0.0972 in.)
		2.47 to 2.49 mm (0.0973 to 0.0980 in.)
		2.49 to 2.51 mm (0.0981 to 0.0988 in.)
		2.51 to 2.53 mm (0.0989 to 0.0996 in.)
		2.53 to 2.55 mm (0.0997 to 0.1003 in.)
		2.55 to 2.57 mm (0.1004 to 0.1011 in.)
		2.57 to 2.59 mm (0.1012 to 0.1019 in.)
		2.59 to 2.61 mm (0.1020 to 0.1027 in.)
		2.61 to 2.63 mm (0.1028 to 0.1035 in.)
		2.63 to 2.65 mm (0.1036 to 0.1043 in.)
		2.65 to 2.67 mm (0.1044 to 0.1051 in.)
		2.67 to 2.69 mm (0.1052 to 0.1059 in.)
		2.69 to 2.71 mm (0.1060 to 0.1066 in.)
		2.71 to 2.73 mm (0.1067 to 0.1074 in.)
		2.73 to 2.75 mm (0.1075 to 0.1082 in.)
		2.75 to 2.77 mm (0.1083 to 0.1090 in.)
		2.77 to 2.79 mm (0.1091 to 0.1098 in.)
		2.79 to 2.81 mm (0.1099 to 0.1106 in.)
		2.81 to 2.83 mm (0.1107 to 0.1114 in.)
		2.83 to 2.85 mm (0.1115 to 0.1122 in.)
		2.85 to 2.87 mm (0.1123 to 0.1129 in.)
		2.87 to 2.89 mm (0.1130 to 0.1137 in.)
		2.89 to 2.91 mm (0.1138 to 0.1145 in.)
		2.91 to 2.93 mm (0.1146 to 0.1153 in.)
		2.93 to 2.95 mm (0.1154 to 0.1161 in.)
		2.95 to 2.97 mm (0.1162 to 0.1169 in.)
		2.97 to 2.99 mm (0.1170 to 0.1177 in.)
		2.99 to 3.01 mm (0.1178 to 0.1185 in.)
		3.01 to 3.03 mm (0.1186 to 0.1192 in.)
		3.03 to 3.05 mm (0.1193 to 0.1200 in.)
		3.05 to 3.07 mm (0.1201 to 0.1208 in.)
		3.07 to 3.09 mm (0.1209 to 0.1216 in.)
		3.09 to 3.11 mm (0.1217 to 0.1224 in.)
		3.11 to 3.13 mm (0.1225 to 0.1232 in.)
		3.13 to 3.15 mm (0.1233 to 0.1240 in.)
		3.15 to 3.17 mm (0.1241 to 0.1248 in.)
		3.17 to 3.19 mm (0.1249 to 0.1255 in.)
		3.19 to 3.21 mm (0.1256 to 0.1263 in.)
		3.21 to 3.23 mm (0.1264 to 0.1271 in.)
Front drive pinion spacer front adjust shim thickness		2.35 to 2.37 mm (0.0925 to 0.0933 in.)
		2.37 to 2.39 mm (0.0934 to 0.0940 in.)
		2.39 to 2.41 mm (0.0941 to 0.0948 in.)
		2.41 to 2.43 mm (0.0949 to 0.0956 in.)
		2.43 to 2.45 mm (0.0957 to 0.0964 in.)
		2.45 to 2.47 mm (0.0965 to 0.0972 in.)
		2.47 to 2.49 mm (0.0973 to 0.0980 in.)
		2.49 to 2.51 mm (0.0981 to 0.0988 in.)
		2.51 to 2.53 mm (0.0989 to 0.0996 in.)
		2.53 to 2.55 mm (0.0997 to 0.1003 in.)
		2.55 to 2.57 mm (0.1004 to 0.1011 in.)
		2.57 to 2.59 mm (0.1012 to 0.1019 in.)
		2.59 to 2.61 mm (0.1020 to 0.1027 in.)
		2.61 to 2.63 mm (0.1028 to 0.1035 in.)
		2.63 to 2.65 mm (0.1036 to 0.1043 in.)
		2.65 to 2.67 mm (0.1044 to 0.1051 in.)
		2.67 to 2.69 mm (0.1052 to 0.1059 in.)
		2.69 to 2.71 mm (0.1060 to 0.1066 in.)