LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (4GR-FSE) - Service Information) >> Accelerator Pedal >> Installation [04/2013 - 08/2015] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ACCELERATOR PEDAL ASSEMBLY 
    1. Install the accelerator pedal assembly with the 2 bolts.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

  2. INSTALL ACCELERATOR PEDAL PAD 
    1. Engage the 2 claws to install the accelerator pedal pad.
  3. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY 
    NOTE:
    • Avoid physical shock to the accelerator pedal sensor assembly.
    • Do not disassemble the accelerator pedal sensor assembly.
    • This accelerator pedal sensor assembly does not require lubrication.
    • Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
    1. Install the accelerator pedal sensor assembly with the 2 nuts.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    2. Connect the accelerator pedal sensor assembly connector.
scientia non olet · About LEMON Manuals