LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (4GR-FSE) - Service Information) >> Accelerator Pedal >> Removal [04/2013 - 08/2015] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY 
    NOTE:
    • Avoid physical shock to the accelerator pedal sensor assembly.
    • Do not disassemble the accelerator pedal sensor assembly.
    • This accelerator pedal sensor assembly does not require lubrication.
    • Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
    1. Disconnect the accelerator pedal sensor assembly connector.
      GTY470334Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and accelerator pedal sensor assembly.
  2. REMOVE ACCELERATOR PEDAL PAD 
    1. Disengage the 2 claws and remove the accelerator pedal pad.
      GTY464445Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ACCELERATOR PEDAL ASSEMBLY 
    1. Remove the 2 bolts and accelerator pedal assembly.
      GTY464442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals