Caution / Notice / Hint
NOTE:
- Before performing troubleshooting, inspect the connectors of related circuits.
- If DTC C1782 (Power Source Voltage Malfunction) is output at the same time, perform troubleshooting for C1782 first.
Refer to DTC C1782: Power Source Voltage Malfunction [04/2013 - 08/2015] , or refer to DTC C1782: Power Source Voltage Malfunction [08/2015 - 10/2017]
- Before replacing the absorber control ECU, perform all of the following again: 1) symptom simulation. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2013 - 06/2014] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2014 - 08/2015] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 10/2016] ; 2) DTC inspection. Refer to DTC CHECK / CLEAR [04/2013 - ] ; and 3) Techstream inspection (ECU Data List or Active Test. Refer to DATA LIST / ACTIVE TEST [04/2013 - ] ). If no malfunctions are found in other areas, replace the absorber control ECU.
- When the absorber control ECU is replaced, switch to test mode and check that all test mode DTCs are cleared when their respective deletion conditions are met.