How To Proceed With Troubleshooting [09/2015 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result:  1

NEXT 

See step  3

1. Refer to the DTC check / clear.

   Refer to DTC CHECK / CLEAR [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  4

1. Refer to the operation check.

   Refer to OPERATION CHECK [09/2015 - ] 

   Result

   Result	Proceed to
   Symptom does not occur	A
   Symptom occurs	B

Result:  2

B 

See step  6

Result:  1

A 

See step  5

1. Refer to HOW TO PROCEED WITH TROUBLESHOOTING.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  6

1. Refer to CAN communication system.

   Refer to PRECAUTION [09/2015 - ]

   HINT: 

   The clearance warning ECU is connected to the CAN communication system. Therefore, be sure to check that there are no problems in the CAN communication system before performing troubleshooting.

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  7

1. Refer to DTC Check / Clear.

   Refer to DTC CHECK / CLEAR [09/2015 - ] 

   Result

   Result	Proceed to
   DTC is output	A
   DTC is not output	B

Result:  2

B 

See step  9

Result:  1

A 

See step  8

1. Refer to the diagnostic trouble code chart.

   Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  10

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  10

Result

Result:  1

NEXT 

See step  11

Result

Result:  1

NEXT 

See step  12

Result

Result:  1

NEXT 

See step  13

Result

Result:  1

NEXT 

END