Reverse Shift-linked Function of Power Mirrors does not Operate [09/2015 - ]: Procedure

1. Use the Techstream to check if the CAN communication system is functioning normally.
   RESULT:
   
   

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

Result:  B

B 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] )

Result:  A

A 

See step  2

1. Check that the outer rear view mirror LH and RH can be moved using the outer mirror switch.

   OK

   Outer rear view mirror LH and RH can be moved using the outer mirror switch.

Result:  NG

NG 

GO TO PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [09/2015 - ] )

Result:  OK

OK 

See step  3

1. Check that the shift indicator of the combination meter operates normally.

   OK

   Shift indicator of combination meter operates normally.

Result:  NG

NG 

GO TO METER / GAUGE SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] )

Result:  OK

OK 

See step  4

1. Replace the front door ECU with a new one or normally operating one, and check if a malfunction disappears.
   RESULT:
   
   

   Result	Proceed to
   Outer rear view mirror LH does not operate normally	A
   Outer rear view mirror RH does not operate normally	B
   Outer rear view mirror LH operates normally	C
   Outer rear view mirror RH operates normally	D

Result:  A

A 

REPLACE OUTER MIRROR ACTUATOR ASSEMBLY LH 

(Refer to DISASSEMBLY [09/2015 - ] )

Result:  B

B 

REPLACE OUTER MIRROR ACTUATOR ASSEMBLY RH 

(Refer to DISASSEMBLY [09/2015 - ] )

Result:  C

C 

REPLACE FRONT DOOR ECU LH 

(Refer to REMOVAL [09/2015 - ] )

Result:  D

D 

REPLACE FRONT DOOR ECU RH 

(Refer to REMOVAL [09/2015 - ] )