DTC P0604: Random Access Memory (RAM) [09/2015 - ]: Procedure

CHECK DTC
1. Clear DTC (Refer to DTC CHECK / CLEAR [09/2015 - ] ).
2. Turn the engine switch off.
3. Disconnect the negative (-) battery terminal and wait for 1 minute (Refer to PRECAUTION [09/2015 - ] ).
4. Connect the negative (-) battery terminal (Refer to PRECAUTION [09/2015 - ] ).
5. Turn the engine switch on (IG).
6. Connect the Techstream to the DLC3.
7. Turn the Techstream on.
8. Wait 16 seconds or more.
9. Enter the following menus: Powertrain / Engine / Trouble Codes.
10. Check DTC.
  OK
  
  P0604 is not present.
Result: OK

OK

CHECK FOR INTERMITTENT PROBLEMS

(Refer to CHECK FOR INTERMITTENT PROBLEMS [09/2015 - ] )

Result: NG

NG

REPLACE ECM

(Refer to REMOVAL [09/2015 - ] )