DTC P1023: Camshaft Position Signal Output "B" Circuit; DTC P2614: Camshaft Position Signal Output Circuit / Open [09/2015 - ]: Procedure

1. Replace the camshaft timing control motor (Refer to REMOVAL [09/2015 - ] ).

Result:  NEXT

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Drive the vehicle in accordance with the driving pa described in the Confirmation Driving Pattern.
3. Enter the following menus: Powertrain / Engine / Trouble Codes.
4. Read the DTCs.

   Result

   Display (DTC Output)	Proceed to
   No output	A
   Other DTCs	B

Result:  A

A 

END 

Result:  B

B 

GO TO DTC CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2015 - 09/2016] Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2016 - ] )