Customize Parameters [09/2015 - ]: Procedure
- CUSTOMIZE POWER MIRROR CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Utility / Customize / Others.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU Reverse Coupled Actuation Mirror Angle (D-Side) Default Setting Function that turns the door mirror reverse shift-linked memory function default setting or user setting Default setting or User Setting Front multiplex network door ECU LH Reverse Coupled Actuation Mirror Angle (P-Side) User Setting Function that turns the door mirror reverse shift-linked memory function default setting or user setting Default setting or User Setting Front multiplex network door ECU RH